Grundig World Receiver G2000A - Manual (Page 11)

GENERAL INFORMATION
Technical specifications
Power supply
Batteries: By 3x 1.5 V batteries (lEC LR 6)
External supply: By a commercial 4.5 V DC
mains unit
Output power 250 mW
Built-in
aerials Telescopic aerial for FM and SW
Ferrite rod aerial for MW
Connecting
sockets
For external voltage supply DC 4.5V:
Coaxial socket
Outer diameter 5.5 mm, inner diameter 2.1
mm
Neutral conductor connected to chassis.
For earphone:
Socket for jack plug of 3.5 mm, 32 Ohm
impedance
Wavebands:
FM: 87.5-108 MHz
MW (10 kHz steps): 520-1710 kHz
MW (9 kHz steps): 522-1620 kHz
SW1: 2.30-7.40 MHz
SW2: 9.40-26.10 MHz
Tuning steps:
FM: 50 kHz
AM: 5 kHz
resp. MW: / 9 / 10kHz
Dimensions (w x h x d):approx. 142 x 92 x 35 mm
Weight: approx. 330 g
Accessories:
ldent card
Instructions for use
stereo in-earphones
leather cover
Subject to technical alterations and alterations in styling E.
and O.E.
Maintenance
• Only a soft cloth which picks up dust should be
used to clean the cabinet. Do not use aggressive
polishes or cleaning agents.
• Do not leave the set for any length of time in direct
sunlight or other places where high temperatures
can occur, such as in a car which is parked in the
sun.
• Rain, moisture (e.g. dripping and splashing) and
excessive heat are bad for the radio and the
batteries.
Recycling
Please observe the local regulations
regarding the disposal of packing materials,
exhausted batteries and old equipment.
• All redundant packaging material has been
omitted. We have done our utmost to make the
packaging easily separable into three mono-
materials:
- cardboard (box),
- expandable polystyrene (buffer)
- polyethylene (bags, protective foam sheet)
• Your set consists of materials which can be
recycled if disassembled by a specialized
company.
• Do not dispose of exhausted batteries with your
household waste.