Grizzly G0560 - Manual (Page 24)

-22- G0560 Meat-Cutting Bandsaw
Damage to your eyes and ears could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
hearing protection when operating this
machine.
The Model G0560 is operated by an ON/OFF
paddle switch that is clearly labeled on the side of
the stand.
This switch is locked out when the key is removed
to protect against accidental operation (
Figure
31).
Figure 32. Blade guard.
Figure 31. Switch lock out.
Blade Guard
Figure 32 shows the blade guard controls. The
blade guard protects the operator from accidental
contact with the part of the blade that is not being
used.
The star knob on the guide rail allows you to raise
and lower the blade guard and blade guide
assembly. Keep the blade guide assembly within
an inch of the material you are cutting. This will
provide adequate support for the blade where the
pressure is greatest.
This adjustment is crucial
for safe operation when cutting through bone!
SECTION 6: OPERATIONS
Guide Rail
Star Knob
Blade Guard