Graco ISPA113AB - Manual (Page 45)

13
3.3 Removing and Attaching Base
3.4 Adjusting Handle
To remove infant restraint, squeeze handle at
back of seat and lift infant restraint from base
as shown ➊ .
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull up
on infant restraint to be sure it is latched
firmly into base.
➊
1. Press handle adjustment buttons on
both sides of handle ➋ .
2. Rotate handle until it clicks into any
of the 5 positions:
Position A: MUST be used
when carrying by handle,
Position B,C,D: are convenience
positions,
Position E: is the sitting position,
NEVER use positions B or C
in the vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place
➌
.
3. Push and pull on the handle
to be sure it is locked firmly
in position.
➋
➌
Carrying
Sitting
A
B
C
D
E