GE 25833 - Manual (Page 44)

44
SEARCHING Indicates handset is searching for the base.
OUT OF RANGE Indicates handset is too far away from the base. Move
closer to the base.
PAGING or Someone pressed the INT button on the handset
PAGING FROM or the PAGE button on the base.
BLOCKED NUMBER Indicates the person is calling from a number which is
blocked from transmission.
REPT Indicates a repeat call message. Indicates a new call from
the same number was received more
than once.
NO CALLS Indicates there are no CID records in memory.
NO DATA Indicates no CID information was received , you are not
subscribed to CID service, or CID service is not working.
NEW CALL XX XX represents the number of new CID records
not reviewed.
LOW BATTERY Indicates the battery needs to be charged.
LONG DISTANCE Indicates CID record is from a long distance call.
PRESS TALK KEY Indicates CID record is Direct Dial Number and cannot be
formatted.
CHARGING... Indicates the handset needs to charge for a period of time
before it can resume normal function. This will happen
after placing the handset on the cradle after you insert the
battery.
Handset Sound Signals
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One long beep Confirmation tone for the completion of
a function
One short beep (every 7 seconds) Low battery warning
One short beep (during room monitoring) Ring alert tone