Gefen EXT-COMPAUD-CAT5-142 - Manual (Page 10)

7
RECEIVER PANEL DESCRIPTIONS
Brightness Trim Pot 1
Use this adjustment Trim Pot to brighten/darken the output video signal. See
page 9.
Focus Trim Pot 2
Use this adjustment Trim Pot to focus/blur the output video signal. See page 9.
Power LED Indicator 3
This LED will become active once the included 5V DC power supply is properly
connected.
5V DC Power Input 4
Connect the included 5V DC power supply input this port. Once this has been
properly connected the power LED will become active.
3 RCA Component Output 1 5
Connect one component display device to this output.
3 RCA Component Output 2 6
Connect one component display device to this output.
2 RCA Analog Stereo Output 1 7
Connect this output to either the display or audio receiver.
2 RCA Analog Stereo Output 2 8
Connect this output to either the display or audio receiver.
SPDIF Digital Audio Output 1 9
Connect this output to either the display or audio receiver.
SPDIF Digital Audio Output 2 10
Connect this output to either the display or audio receiver.
Optical Digital Audio Output 1 11
Connect this output to either the display or audio receiver.
Optical Digital Audio Output 2 12
Connect this output to either the display or audio receiver.
RJ-45 Jack 13
Connect the sending and receiving units together using a TIA/EIA-568-B
terminated CAT-5, CAT-5e or CAT-6 cable. See page 10.