GE 24999 - Manual (Page 9)

9
Searching for Codes
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.for.
your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.code.by.
following.these.steps.
1..Manually.turn.on.the.device.( TV,.VCR,.DVD,.etc.).to.be.controlled.
2..Press.and.hold.the. SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
3..Press.and.release. OK..LIST.CODES.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.SEARCH.CODES.is.
displayed.
5..Press.and.release. OK..MODE.KEY.is.displayed.
6..Press.and.release.the.desired.mode.button.( TV, VCR,.DVD,.etc.)..
DEVICE?.TV.is.displayed.
7..Using.the.Up/Down.keys,.select.the.Device.type.to.be.programmed.
(TV,.VCR,.DVD,.etc.. Note - For TV Mode, only a TV Device can be
selected.
8..Press.and.release. OK to.confirm.selection..SEARCH.KEY?.is.displayed..
9..Press.the. CHANNEL UP.button.(or.POWER,.or.PLAY for.VCRs/
DVDs).repeatedly.(up.to.300.times).until.the.Device.to.be.controlled.
changes.channel,.turns.off.or.responds.accordingly..SEARCHING.
is.displayed.(along.with.the.Device.selection).during.the.search.
process..If.the.desired.Code.is.accidentally.passed.then.press.the.
CHANNEL DOWN.button.to.backtrack.through.the.Library..Press.
CHANNEL UP.(or.POWER.or.PLAY).to.change.direction.forward.again..
10..Press.and.release. OK to.install.the.Code..PLEASE.WAIT.is.briefly.
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.
operation.
Notes:
1..If.the.Device.does.not.have.a.
CHANNEL UP button,.use.PLAY (VCR/DVD).
or.the. POWER button.instead.
2..Code.Search.starts.from.the.currently.stored.4-digit.number.under.
that.Mode.
3.. When. all. codes. have. been. searched. SEARCH. END. is. displayed. and.
remote.returns.to.normal.operation.
Code Identification Feature
Press.and.hold.the.respective.Mode.key.in.normal.operation.to.display.
the.programmed.code.for.that.Mode.e.g.,.DVD.Code.0768.
Programming Combo Device Codes
Some.combo.(combination).devices.(TV/DVR,.TV/DVD,.DVD/DVR,.etc.).
require.you.to.set.up.2.different.modes.to.control.both.parts.of.the.
combo..For.example,.if.you.have.a.TV/DVD.combo,.you.might.need.to.
set.up.one.code.under.the.TV.mode.to.control.the.TV.and.a.separate.
code.(under.other.modes).to.control.the.DVD.
Code Entry, cont.