GE 24999 - Manual (Page 14)

14
Setup, cont.
Timer Setup
Pressing.
OK at.TIMER.SETUP.accesses.the.available.Timer.Options..
These.are.a.TV.Sleep.Timer.and.4.Timers.that.can.send.a.sequence.of.
up.to.3.key.commands.at.the.preset.time.
Setting and Clearing a TV Sleep Timer (TV Sleep Setup)
The.remote.can.be.programmed.with.a.TV.Sleep.Timer..At.the.end.of.
the.set.Timer.period,.the.remote.sends.the.Power.command.for.the.
TV.Mode.device..The.TV.Sleep.Timer.can.be.set.for.a.period.of.1-90.
minutes..The.“Zzz”.symbol.is.displayed.when.a.TV.Sleep.Timer.is.set.
To set a TV Sleep Timer (no “Zzz” in normal display)
1..Turn.on.the.TV.Mode.device.
2..Press.and.hold.the.
SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
3.. Press. the. down. navigation. button. repeatedly. until. TIMER. SETUP. is.
displayed..Press.and.release. OK.
4..TV.SLEEP.SETUP.is.displayed..Press.and.release. OK.
5..TV.SLEEP.SET.is.displayed..Press.and.release. OK.
6..TV.SLEEP.TIME?.is.displayed.with.“minutes”.flashing..Use.the.Up/Down.
buttons.to.set.the.minutes.then.press.and.release. OK.
7..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press. EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..
Zzz.is.displayed.on.the.screen.to.indicate.that.a.Sleep.Timer.is.set.
To clear a TV Sleep Timer (“Zzz” in normal display)
1..Press.and.hold.the.
SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press. the. down. navigation. button. repeatedly. until. TIMER. SETUP. is.
displayed..Press.and.release. OK.
3..TV.SLEEP.SETUP.is.displayed..Press.and.release. OK.
4..TV.SLEEP.CLEAR.is.displayed..Press.and.release. OK.
5..CONFIRM.CLEAR.is.displayed..Press.and.release. OK.
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press. EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
Setting and Clearing Timers (TIMER SETUP)
The.remote.can.be.programmed.with.up.to.4.Timers.(Timer.1,.2,.3.&.4)..
Each.Timer.can.be.assigned.up.to.2.keys.to.activate.at.the.set.time..The.
first.key.must.always.be.a.Mode.key..Subsequent.keys.cannot.include.
Up,.Down,.Left,.Right,.OK,.Exit,.Setup.or.any.Mode.key..Timers.can.only.
activate.within.the.following.24-hour.period..Timers.are.automatically.
cleared.after.activation..The.“Timer.Bell”.symbol.is.displayed.when.any.
Timer.is.set.