beautypg.com

English, 7 mb intelligent tweaker(m.i.t.), Cpu clock ratio – GIGABYTE GA-8I865PE775-G-RH User Manual

Page 42: Cpu host clock control, Cpu host frequency (mhz), Agp/pci/src fixed

background image

GA-8I865PE775-G-RH Motherboard

- 42 -

English

2-7

MB Intelligent Tweaker(M.I.T.)

CPU Clock Ratio

(Note)

This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.

CPU Host Clock Control

Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.

Disabled

Disable CPU Host Clock Control. (Default value)

Enabled

Enable CPU Host Clock Control.

CPU Host Frequency (Mhz)

100MHz ~ 355MHz

Set CPU Host Frequency from 100MHz to 355MHz.

If you use FSB533 Pentium 4 processor, please set "CPU Host Frequency" to 133MHz.If you use
FSB800 Pentium 4 processor, please set "CPU Host Frequency" to 200MHz.
Incorrect using it may cause your system broken. For power End-User use only!

AGP/PCI/SRC Fixed

This item will be available when "CPU Host Clock Control" is set to Enabled.
Serial ATA device is very sensitive to SRC clock. SRC over clock may make Serial ATA device
function can't work properly.

Adjust AGP/PCI/SRC clock asychrohous with CPU.

Incorrect using these features may cause your system broken. For power end-user use only.

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software

MB Intelligent Tweaker(M.I.T.)

CPU Clock Ratio

(Note)

[18X]

CPU Host Clock Control

[Disabled]

x CPU Host Frequency (Mhz)

200

x AGP/PCI/SRC Fixed

66/33/100

Memory Frequency For

[Auto]

Memory Frequency (Mhz)

400

AGP/PCI/SRC Frequency (Mhz)

66/33/100

DIMM OverVoltage Control

[Normal]

AGP OverVoltage Control

[Normal]

FSB OverVoltage Control

[Normal]

CPU Voltage Control

[Normal]

Normal CPU Vcore

1.3875V

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level`

(Note) This item will show up when you install a processor which supports this function.