English, 1 standard cmos features, Date – GIGABYTE GA-8I865PE775-G-RH User Manual
Page 30: Time, Ide channel 2/3 master

GA-8I865PE775-G-RH Motherboard
- 30 -
English
2-1
Standard CMOS Features
Date
The date format is
Week
The week, from Sun to Sat, determined by the BIOS and is display only
Month
The month, Jan. Through Dec.
Day
The day, from 1 to 31 (or the maximum allowed in the month)
Year
The year, from 1999 through 2098
Time
The times format in
time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master/Slave ; IDE Channel 1 Master/Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Channel 0 Master/Slave ; IDE Channel 1 Master/Slave
IDE devices setup. You can use one of three methods:
• Auto
Allows BIOS to automatically detect IDE devices during POST. (Default value)
• None
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
• Manual
User can manually input the correct settings.
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Capacity
Capacity of currectly installed hard drive.
IDE Channel 2/3 Master
IDE/SATA HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
Extended IDE/SATA Drive. You can use one of the two methods:
Auto
Allows BIOS to automatically detect IDE/SATA devices during POST(default)
None
Select this if no IDE/SATA devices are used and the system will skip the
automatic detection step and allow for faster system start up.
Access Mode Use this to set the access mode for the hard drive. The two options are:
Large/Auto(default:Auto)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Wed
, Jan 11 2006
Time (hh:mm:ss)
22:31:24
` IDE Channel 0 Master
[None]
` IDE Channel 0 Slave
[None]
` IDE Channel 1 Master
[None]
` IDE Channel 1 Slave
[None]
` IDE Channel 2 Master
[None]
` IDE Channel 3 Master
[None]
Drive A
[1.44M, 3.5"]
Drive B
[None]
Floppy 3 Mode Support
[Disabled]
Halt On
[All, But Keyboard]
Base Memory
640K
Extended Memory
511M
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Default
F7: Optimized Defaults
Item Help
Menu Level`