Sangean DPR-25+ - Manual (Page 11)

10
Presetting stations
There are 5 memory presets on each radio band DAB and FM.
1. Press the On/Off button to switch on the radio.
2. Tune to the required station as previously described.
3. Press and hold down the required Preset button until the display
show e.g. “Preset 1 stored“. The station will be saved under the
chosen preset button. Repeat this procedure for the
remaining presets.
4. Stations stored in preset memories may be overwritten by following
above procedures.
Recalling a preset station
1. Press the On/Off button to switch on your radio.
2. Select required waveband by pressing the Band button.
3. Momentarily press the required Preset button, your radio will tune to
the station stored in preset memory.
Note:
If you have not previously stored a preset station and preset buttons are
pressed “Preset empty“ will be displayed.
GB