GE JRP 28 User Manual

Page 11

Safety Instructions

Operating Instructions

Care and Cleaning

oubleshooting T

ips

Consumer Support

www.GEAppliances.com

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is touched. This continuous
6 second beep may be canceled.

To cancel the 6 second beep:

Touch the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.

Touch the BROIL HI/LO pad. The
display shows CON BEEP (continuous
beep). Touch the BROIL HI/LO pad
again. The display shows BEEP.
(This cancels the one beep
every 6 seconds.)

Touch the START pad.

NOTE: This feature is not available for the
lower oven.

12 Hour, 24 Hour or Clock Black-Out

Your control is set to use a 12 hour clock.

If you would prefer to have a 24 hour
military time clock or black-out the clock
display, follow the steps below.

Touch the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.

Touch the TIMER/CLOCK pad once.
The display will show 12 hr. If this
is the choice you want touch the
START pad.

Touch the TIMER/CLOCK pad again
to change to the 24 hour military
time clock. The display will show 24
hr. If this is the choice you want
touch the START pad.

Touch the TIMER/CLOCK pad again
to black-out the clock display.
The display will show OFF.
If this is the choice you want
touch the START pad.

NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.