GE 26934 - Manual (Page 2)

5. Press the memory button to save the name. The display
shows ENTER TEL NUMBR.
6. Use the number keypad to enter the telephone number
you want to store (up to 24 digits).
7. Press memory again to store the number. You will hear a
confirmation tone.
C
HANGING A
S
TORED
N
UMBER
1. Repeat steps 1 through 7 in Storing a Name and
Number in Memory.
2. Press the memory button and REPLACE MEMO? shows
in the display.
3. Press *tone/cancel to exit, or press the memory button
to store the number. You will hear a confirmation tone.
S
TORING A
R
EDIAL
N
UMBER
1. Repeat steps 1 through 6 in Storing a Name and Number
in Memory.
2. Press the redial button.
3. Press the memory button to store the number. You will
hear a confirmation tone.
To replace an old redial number stored in a memory
locations with a new redial number:
1. Repeat steps 1 through 6 in Storing a Name and
Number in Memory.
2. Press the memory button and REPLACE MEMO? shows
in the display.
3. Press *tone/cancel to exit, or press the memory button
again and the new redial number replaces the old redial
number in that memory location. You will hear a
confirmation tone.
D
IALING A
S
TORED
N
UMBER
1. Make sure the phone is ON by pressing the TALK/
callback button.
2. Press memory button.
3. Press the number (0-9) for the desired memory location.
The number dials automatically.
- OR -
1. Make sure the phone is OFF (not in TALK mode).
2. Press memory button.
3. Use the CID/VOL (-) arrow or CID/VOL (+) arrow button to
scroll through the numbers stored in memory until the
desired number is shown.
4. Press TALK/callback. The numbers dial automatically.
IMPORTANT: If you make test calls to emergency
numbers stored in memory, remain on the line and
briefly explain the reason for the call to the dispatcher.
Also, it’s a good idea to make these calls in off-peak
hours, such as early morning or late evening.
I
NSERTING A
P
AUSE IN THE
D
IALING
S
EQUENCE
When storing information in memory, press the # pause
button twice within one second to insert a delay in the
dialing sequence of a stored telephone number when a
pause is needed to wait for a dial tone (for example after
you dial 9 for an outside line, or to wait for a computer
access tone). PAUSE shows on the display as a
“P. “ Each
pause counts as 1 digit in the dialing sequence.
R
EVIEWING AND
D
ELETING
S
TORED
N
UMBERS
1. Press memory, then use the CID/VOL (-) arrow or CID/
VOL (+) arrow button to view the entry.
2. While the entry is displayed, press channel/delete button
to delete the entry. The display shows DELETE?
3. Press channel/delete again to delete the entry. DELETED
shows in the display.
C
HAIN
D
IALING FROM
M
EMORY
Use this feature to make calls which require a sequence of
numbers such as using a calling card for a frequently
called long distance number. Basically, you dial each part
of the sequence from memory. The following example
shows how you can use chain dialing to make a call
through a long distance service:
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Make sure the phone is ON.
2. Press memory and then press 7.
3. When you hear the access tone, press memory again
and then press 8.
4. At the next access tone, press memory and then 9.
TIP: Wait for the access tones between pressing the
memory button, or your call might not go through.
H
EADSET AND
B
ELT
C
LIP
O
PERATION
C
ONNECTING
AN
O
PTIONAL
HEADSET TO
THE HANDSET
For hands free
conversation, connect
the headset (optional)
to the HEADSET jack
as shown. The handset
receiver and
microphone are
disabled when the
headset is connected.
TIP: To order a headset, please refer to the accessory
order form at the end of this user’s guide.
Adjust the headset to
rest comfortably on top
of your head and over
your ear. Move the
microphone to
approximately 2 to 3
inches from your mouth.
• Press the TALK button
to answer or place a
call before using the headset.
C
ONNECTING THE
B
ELT
C
LIP
There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip
into the slots. Snap the ends of the belt clip into place.
C
HANGING THE
B
ATTERY
Make sure the telephone is OFF before
you replace battery.
1. Remove the battery compartment
door.
2. Disconnect the battery plug from the
jack in the handset battery
compartment and remove the battery
pack.
3. Insert the new battery pack and
connect the cord into the jack inside
the handset.
4. Put the battery compartment door
back on.
5. Place handset in the base to charge. Allow the handset
battery to properly charge (for 12 hours) prior to first use
or when you install a new battery pack. If you do not
properly charge the phone, battery performance will be
compromised.
CAUTION: To reduce the risk of fire or personal
injury, use only the battery 5-2461.
B
ATTERY
S
AFETY
P
RECAUTIONS
• Do not burn, disassemble, mutilate, or puncture. Like
other batteries of this type, toxic materials could be
released which can cause injury.
• To reduce the risk of fire or personal injury, use only the
battery listed in the User’s Guide.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
G
ENERAL
P
RODUCT
C
ARE
To keep your telephone working and looking good, follow
these guidelines:
• Avoid putting the phone near heating appliances and
devices that generate electrical noise (for example,
motors or fluorescent lamps).
• DO NOT expose to direct sunlight or moisture.
• Avoid dropping and other rough treatment to the phone.
• Clean with a soft cloth.
• Never use a strong cleaning agent or abrasive powder
because this will damage the finish.
• Retain the original packaging in case you need to ship
the phone at a later date.
C
AUSES OF
P
OOR
R
ECEPTION
• Aluminum siding.
• Foil backing on insulation.
• Heating ducts and other metal construction can shield
radio signals.
• You’re too close to appliances such as microwaves,
stoves, computers, etc.
• Atmospheric conditions, such as strong storms.
• Base is installed in the basement or lower floor of
the house.
• Base is plugged into an AC outlet with other
electronic devices.
• Baby monitor is using the same frequency.
• Handset battery is low.
• You’re out of range of the base.
D
ISPLAY
M
ESSAGES
The following indicators show the status of a message or
of the unit.
INCOMPLETE DATA Caller information has been
interrupted during transmission or
the phone line is excessively noisy.
ENTER NAME Prompt telling you to enter the
name for one of the 10 memory
locations.
ENTER TEL NUMBR Prompt telling you to enter the
telephone number for one of the
10 memory locations.
DELETE? Prompt asking if you want to erase
Caller ID records or one of the 10
numbers stored in the phone’s
outgoing memory.
DELETE ALL? Prompt asking if you want to erase
all Caller ID records.
DELETED Prompt confirming the Caller ID /
Memory record is erased.
END OF LIST Indicates that there is no
additional information in Caller ID
memory.
NEW Indicates call or calls have not
been reviewed.
UNKNOWN NAME/ The incoming call is from
CALLER/NUMBER an area not serviced by Caller ID
or the information was not sent.
PAGING Someone has pressed the page
button on the base.
BLOCKED CALL The person is calling from a
number that has been blocked
from transmission.
BLOCKED NAME The person’s name is blocked
from transmission.
REPT Repeat call message. Indicates
that a new call from the same
number was received more than
once.
NO DATA No Caller ID information was
received.
EMPTY Indicates a memory location is
vacant.
NO CALLS Indicates no CID records have
been stored.
MESSAGE WAITING Indicates a message is available.
H
ANDSET
S
OUND
S
IGNALS
Signal Meaning
A long warbling tone Signals an incoming call
(with ringer on)
Two long beeps Confirmation Tone
One short and one long beep Page signal
One short beep Low battery warning
every seven seconds
T
ROUBLESHOOTING
T
IPS
C
ALLER
ID
No Display
• Is battery fully charged? Try replacing the battery. Make
sure the battery is properly installed and connected.
• If you are using AC power, make sure that the unit is
connected to a non-switched electrical outlet.
Disconnect the unit from the plug and plug it in again.
• Did you order Caller ID service from your local
telephone company?
Caller ID Error Message
• The unit displays this message if it detects anything
other than valid Caller ID information during the silent
period after the first ring. This message indicates the
presence of noise on the line.
T
ELEPHONE
No dial tone
• Check installation:
— Is the base power cord connected to a working outlet?
— Is the telephone line cord connected to the base unit
and the wall jack?
• Disconnect the base from the wall jack and connect
another phone to the same jack. If there is no dial tone
in the second phone, the problem might be your wiring
or local service.
• Is the handset out of range of the base?
• Make sure the battery is properly charged (12 hours).
• Is the battery pack installed correctly?
• Did the handset beep when you pressed the TALK/
callback button? Did the display indicator turn on? The
battery may need to be charged.
Dial tone is OK, but can't dial out
• Make sure the tone/pulse setting is programmed
correctly.
Handset does not ring
• Make sure the ringer switch on the handset is turned
to ON.
• You may have too many extension phones on your line.
Try unplugging some phones.
• See solutions for “No dial tone.”
In use/charge indicator on the base flashes
• Provided your phone company offers voice messaging
service and you subscribe to it, the in use/charge
indicator on the base flashes when the phone is not in
use to indicate there is a message waiting. It stops
flashing after the message has been reviewed.
CUS
T
OMER:
CUT
AL
ONG DO
T
TED LINE.
✂
DESCRIPTION MODEL NO. TOTAL QTY. PRICE*
Belt clip $10.85
Headset $36.35
$9.95 Replacement battery
A
CCESSORY
O
RDER
F
ORM
5-2557
5-2601
5-2461
Please make sure that this form has been filled out completely.
To order, call 1-800-338-0376 (for accessories only) or
complete this order form.
Copy your complete account number from your
Master Card or Discover.
____________________________________________________________________
Authorized Signature
My card expires:
Copy the number above your
name on the Master Card.
For credit card purchases
Your complete charge card number, its expiration date and your
signature are necessary to process all charge card orders.
Copy your complete account number from your VISA card.
My card expires:
*Prices are subject to change without notice.
Total Merchandise.........................................$_______________
Sales Tax........................................................$_______________
We are required by law to collect the appropriate sales tax for each individual state,
county, and locality to which the merchandise is being sent. Duties will apply for
shipments to Canada.
Use VISA or Master Card or Discover preferably. Money order or check must be in U.S.
currency only. No COD or Cash. All accessories are subject to availability. Where
applicable, we will ship a superseding model.
Shipping/Handling....................................... $_______________
Total Amount Enclosed.................................$_______________
Mail order form and money order or check (in U.S. currency)
made payable to Thomson to:
Thomson
Mail Order Department
P.O. Box 8419
Ronks, PA 17573-8419
Name_______________________________________________________
Address_____________________________________ Apt.____________
City ________________________State________ ZIP_________________
Daytime Phone Number ( )_______________________________
$5.00
$24.95 Power supply 5-2559
You experience static, noise, or fading in and out
• Change channels
• Is handset out of range? Move closer to the base.
• Does the base need to be relocated?
• Charge battery.
• Make sure base is not plugged into an outlet with
another household appliance.
Unit beeps
• Place handset in base for 20 seconds to reset the
security code. If that doesn’t work, charge battery for 12
hours.
• See solutions for “No dial tone.”
• Replace battery.
Memory Dialing
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure the tone/pulse setting is programmed correctly.
• Did you reprogram numbers into memory after power
outage or battery replacement?
S
ERVICE
If trouble is experienced with this equipment, for repair or
warranty information, please contact customer service at
1-800-448-0329. If the equipment is causing harm to the
telephone network, the telephone company may request that
you disconnect the equipment until the problem is resolved.
This product may be serviced only by the manufacturer or
its authorized service agents. Changes or modifications not
expressly approved by ATLINKS USA, Inc. could void the
user’s authority to operate this product. For instructions on
how to obtain service, refer to the warranty included in this
guide or call customer service at 1-800-448-0329.
Or refer inquiries to:
ATLINKS USA, Inc.
Manager, Consumer Relations
P O Box 1976
Indianapolis, IN 46206
Attach your sales receipt to the booklet for future reference
or jot down the date this product was purchased or
received as a gift. This information will be valuable if
service should be required during the warranty period.
Purchase date _________________________________________
Name of store _________________________________________
I
NTERFERENCE
I
NFORMATION
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference; and (2)
This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna (that is, the
antenna for radio or television that is “receiving” the
interference).
• Reorient or relocate and increase the separation
between the telecommunications equipment and
receiving antenna.
• Connect the telecommunications equipment into an
outlet on a circuit different from that to which the
receiving antenna is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
If these measures do not eliminate the interference, please
consult your dealer or an experienced radio/television
technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful
booklet, “How To Identify and Resolve Radio/TV
Interference Problems.” This booklet is available from the
U.S. Government Printing Office, Washington, D.C. 20402.
Please specify stock number 004-000-00345-4 when
ordering copies.
L
IMITED
W
ARRANTY
What your warranty covers:
• Defects in materials or workmanship.
For how long after your purchase:
•
One year, from date of purchase.
(The warranty period for rental units begins with the
first rental or 45 days from date of shipment to the
rental firm, whichever comes first.)
What we will do:
•
Provide you with a new or, at our option, a refurbished
unit. The exchange unit is under warranty for the
remainder of the original product’s warranty period.
How you get service:
• Properly pack your unit. Include any cables, etc., which
were originally provided with the product. We
recommend using the original carton and packing
materials.
• ”Proof of purchase in the form of a bill of sale or
receipted invoice which is evidence that the product is
within the warranty period, must be presented to obtain
warranty service.” For rental firms, proof of first rental
is also required. Also print your name and address and
a description of the defect. Send via standard UPS or its
equivalent to:
ATLINKS USA, Inc.
c/o Thomson
11721 B Alameda Ave.
Socorro, Texas 79927
• Pay any charges billed to you by the Exchange Center
for service not covered by the warranty.
• Insure your shipment for loss or damage. ATLINKS
accepts no liability in case of damage or loss.
• A new or refurbished unit will be shipped to you freight
prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides
information regarding operating instructions and user
controls. Any additional information, should be
obtained from your dealer.)
• Installation and setup service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated
into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning
damage.
Product Registration:
•
Please complete and mail the Product Registration Card
packed with your unit. It will make it easier to contact
you should it ever be necessary. The return of the card
is not required for warranty coverage.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY
WARRANTY APPLICABLE TO THIS PRODUCT. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY ATLINKS USA,
INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE A
GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF
THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. ATLINKS USA, INC. SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
THIS DISCLAIMER OF WARRANTIES AND LIMITED
WARRANTY ARE GOVERNED BY THE LAWS OF THE
Headset jack
Headset plug
Slot for
belt clip Slot for
belt clip
black white
5-2556
n/a
5-2461
5-2558
NOTE: The RBRC seal on the battery
used in your ATLINKS USA, Inc.
product indicates that we are
participating in a program to collect
and recycle Nickel Cadmium batteries
throughout the United States. Please
call 1-800-8-BATTERY for information
or contact your local recycling center.
Ni-Cd
RB
RC
RB
RC
STATE OF INDIANA. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH
ABOVE.
How state law relates to this warranty:
•
Some states do not allow the exclusion nor limitation of
incidental or consequential damages, or limitations on
how long an implied warranty lasts so the above
limitations or exclusions may not apply to you.
• This warranty gives you specific legal rights, and you
also may have other rights that vary from state to state.
If you purchased your product outside the USA:
• This warranty does not apply. Contact your dealer for
warranty information.