How to set oven for cleaning, How to set delay start of cleaning – GE Monogram ZEK735 User Manual

Page 27

How to Set Oven for Cleaning

1. Follow the steps in the Before a Clean

Cycle section.

2. Press SELF CLEAN.

3. Press the number pads to set the

clean time, if a time other than
4 hours is needed.

Clean time is normally 4 hours. You can
change the clean time to any time
between 3 to 5 hours, depending on the
amount of soil in your oven.

4. Press START.

The door locks automatically. The
display will show the clean time
remaining. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and
the LOCKED DOOR light goes off.

5. When the LOCKED DOOR light is off,

open the door.

NOTE:

• You can find out when the clean cycle

will start by pressing DELAY START.

• The display will flash and the control

will beep if you set the clean cycle and
forget to close the oven door.

D E L A Y
S T A R T

START

S E L F

C L E A N

Easy Steps:

1. Press SELF CLEAN.

2. Press the number pads to set the clean time.

3. Press START.

How to Set Delay Start of Cleaning

Delay Start is setting the oven to start the clean
cycle automatically at a later time than the present
time of day.

NOTE: Before beginning, make sure the oven clock
shows the correct time of day.

1. Follow the steps in the Before a Clean

Cycle section.

2. Press SELF CLEAN.

3. Press the number pads to set the

clean time.

4. Press DELAY START.

5. Press the number pads to set the time of

day you want the clean cycle to start.

6. Press START.

The door locks automatically. The
display will show the start time. It will
not be possible to open the oven door
until the temperature drops below the
lock temperature and the LOCKED
DOOR light goes off.

7. When the LOCKED DOOR light is off,

open the door.

(continued next page)