beautypg.com

Garmin Edge 605 User Manual

Page 9

background image

not enough room between the

sensor arm and the spoke. The

magnet must be aligned with

the sensor arm indication line.

4. Loosen the screw on the sensor

arm and move it to within 5 mm of

the spoke magnet. You can also

tilt the GSC 10 closer to either

magnet for improved alignment.

5. Press the

Reset

button on the

GSC 10. The LED turns red,

then green. Pedal to test the

sensor alignment. The red LED

blinks each time the crank arm

passes the sensor, and the green

LED blinks each time the wheel

magnet passes the sensor arm.

note: The LED blinks

for the first 60 passes after

a reset. Press

reset

again

if you require additional

passes.

GSC 10 and magnet alignment

Spoke magnet

Sensor arm

indication line

Pedal magnet

GSC 10