Step 3: turn on your edge, Step 4: acquire satellite signals, Step 5: save your home location (optional) – Garmin Edge 605 User Manual
Page 6: Step 6: set up sensors (edge 705)
To release the Edge:
Press down on the release lever, and
slide the Edge to the right.
Step 3: Turn on Your
Edge
Press and hold to turn on
your Edge. Follow the on-screen
configuration instructions.
Step 4: Acquire
Satellite Signals
It may take 30–60 seconds to acquire
signals. Go outdoors to an open area.
For the best reception, make sure the
front of the Edge is oriented toward
the sky.
Step 5: Save Your
Home Location
(Optional)
You can set a home location for the
place you return to most often.
1. Press
menu
> select
Where To
>
Find Places
>
Favorites
>
Go Home
.
2. Follow the on-screen instructions.
Step 6: Set Up
Sensors (Edge 705)
If your Edge included a heart rate
monitor or GSC
™
10 speed and
cadence sensor, the ANT+Sport
™
sensors are already paired. Press
menu
. The and icons stop
flashing when the sensors are paired.
After a period of inactivity,
accessories go into sleep mode to
conserve battery life. If the accessory
icons are not lit before resuming