GE 19230 - Manual (Page 7)

Troubleshooting:
1. Make sure the batteries are installed according to the polarity markings
inside the battery compartment on the Chime Unit.
2. Make sure the battery is installed according to the polarity markings
inside the battery compartment on the Push Button.
3. Try installing new batteries.
4. Make sure the Chime Unit is no farther than 150ft. from the Push Button.
5. Try moving the Chime Unit to a different location that is within the 150ft.
range.
6. Make sure the Push button is not mounted on a metal surface, on or near
metal studs, or near the floor. (Push Button should be mounted 36” to 44”
from the floor)
7. Make sure the Push Button and the Chime Unit is properly linked. (Refer to
the section “Linking the Push Button to the Chime Unit”)
Functional range may be adversely affected by one or more of the
following factors:
• Weather
• Radio Frequency Interference
• Low Transmitter Battery (Push Button)
• Obstruction between Push Button and Chime Unit
FCC Statement:
This device complies with Part 15 of FCC rules. Operation is subject to the
following conditions.
1. This device may not cause harmful interference.
2. This device must accept interference that may cause undesired operation.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the