Stovax RVF40AVH - Manual (Page 13)

13
MAINTENANCE and SERVICING
(Tool required - 4mm A/F Hex socket key)
10.1 To maintain the safe use of your Riva stove, you may need
to adjust the door hinges to ensure safe correct closing of
the door. Complete this operating as follows.
10.2 Open the door to give access to the fixed part of the door
hinge as shown.
10.3 To adjust the door alignment, loosen the 6 fixing screws
using a 4mm A/F hexagon head socket key. Turn screw A to
level the door. Turn screw B to raise or lower the door.
Re-tighten the fixing screws and check alignment. This may
require a trial and error approach to find the correct
position.
(Tool required - 2.5mm A/F Hex socket key)
11.1 It is possible to correct the fit of the ashpit door by
loosening the hinge fixing screws and repositioning the
hinges.
(Tool required - 2.5mm A/F Hex socket key)
12.1 It is possible to correct the operation of the ashpit door
touch latch by loosening the latches fixing screws and
repositioning the latch. This may need a trial and error
approach to find the correct position.
10. ADJUSTING DOOR HINGES 11. ADJUSTING ASHPAN COVER HINGES
12. ADJUSTING ASHPAN DOOR TOUCH
LATCH
Fixing Screws
Fixing Screws
PR7188
A
B