beautypg.com

Maintenance and servicing, Fitting and removal of baffles – Stovax RVF40AVH User Manual

Page 10

background image

This is a list of the maintenance products you may need to use

Task

Product name

Stovax Code

number

Glass cleaning

Stove glass cleaner 500ml –

4111

wipe on
Stove glass cleaner –

spray on

4130

Preventing build-up Protector (15 sachets)

7002

of creosote in flue Protector (1kg tub)

7025

Sealing flue

Fire Cement - 500g tub

2020

pipe joints

Fire Cement - 600g cartridge

2021

Re-painting

Storm Metallic

RVAC010

Metallic Black

RVAC011

Protecting your

Heat resistant leather gloves

4008

hands
Door sealing rope 16mm White rope seal –

5001

Handy pack
16mm White rope seal –

4096

20m reel

Glass sealing tape 20mm x 2mm Black tape seal –

4998

Handy pack
20mm x 2mm Black tape seal –

4997

20m reel

Fixing door seal

Thermic seal glue – 50ml

5037

Holding Tools

Optional tool holder

RVAC015

These products, all available from you local Stovax dealer,

along with regular maintenance and use of the correct fuels,

will help you to keep your stove in the best possible

condition.

4.15 When using the stove for the first time again it is best to

burn the fire at a low output for the first day of use. This

will allow the new seals to settle and all new fixing glues

and paint to fully cure.

During this time the stove may give off some unpleasant

odours, and we recommend that you keep the room well

ventilated during this period to avoid a build-up of fumes.

If you require help your local Stovax dealer will be able to

carry-out all of your service and maintenance requirements

for a reasonable cost.

10

MAINTENANCE and SERVICING

5.1

To maintain efficient combustion the Riva stove is fitted

with a twin baffle system, consisting of upper and lower

baffles.

5.2

Allow the stove to cool fully before removing baffle system.

5.3

To remove the baffle, first remove the Log Guard from the

stove to give access to the firebox.

5.4

First remove the Lower Baffle by lifting the front edge to

unhook it from the support bars, then pull the baffle

forward to disengage the rear edge from the location above

air inlet holes. Rotate the baffle to remove from the firebox

through the door opening.

5.5

Second remove the Upper Baffle by pulling forward to

disengage it from the hanging points at the top of the

firebox. Rotate the baffle to remove from the firebox

through the door opening..

5. FITTING AND REMOVAL OF BAFFLES

Upper baffle

Lower baffle

PR7099

Lower baffle