Elephone – GE 29893 User Manual
Page 8

8
M
OVING
THE
A
NSWERING
S
YSTEM
1. Disconnect the phone line from the modular telephone (wall) jack.
2. Unplug the power supply from the electrical outlet.
3. Move the unit and line cords to the desired location.
4. Connect the power supply to an electrical (AC) outlet. The display shows that the
messages have not been erased.
5. Connect the phone line.
6. Reset the time/date settings or wait for the next call to set them automatically.
T
ELEPHONE
S
ET
U
P
Default Settings
Display Contrast
3
Time/Date
12 a.m. 1/01
Local Area Code
– – –
Message Length
2 minutes
Rings to Answer
4
Security Code
123
Dialing
Tone
Regional Area Codes – – –
You can customize the following settings to suit
your needs.
Display Contrast
Selects the display
contrast.
Time/Date
Sets the time and date.
Local Area Code
Sets your local area code
for Dial Back.
Message Length
Sets the length of time
allowed for
incoming messages.
Rings to Answer
Selects the number of
rings before the unit
answers.
Remote Access
Sets your 3-digit code
used for remote access
to the unit.
Dialing
Sets the phone for tone
or pulse dialing.
Regional Area Codes
Sets your regional area
codes if you have
multiple area codes
where you live.