Gefen GEF-3GSDI-16416 - Manual (Page 11)

8
How to Connect the 16x16 3GSDI Matrix
1. Connect up to 16 3G-SDI source devices to the 3G-SDI inputs on the rear
panel of the 16x16 3GSDI Matrix using SDI cables.
2. Connect up to 16 3G-SDI displays to the 3G-SDI outputs on the rear panel
of the 16x16 3GSDI Matrix.
3. Connect the included power cord to the power input receptacle on the rear
panel of the 16x16 3GSDI Matrix. Connect the opposite end of the cable into
a open wall power socket.
How to Operate the 16x16 3GSDI Matrix
The 16x16 3GSDI Matrix offers a number of control options. The following
options can be used to control basic routing functions of the 16x16 3GSDI Matrix:
1. Front Panel Control Buttons - Pages 9 - 12.
2. IR Remote Control - Pages 13 - 15.
3. RS-232 Serial Control - Pages 16 -23.
4. IP Control - Pages 24 - 27.
Wiring Diagram for the GefenPRO 16x16 3GSDI Matrix
CONNECTING AND OPERATING THE 16X16 3GSDI MATRIX
GEF-3GSDI-16416
3G-SDI Displays
SDI CABLE
16x
3G-SDI Sources
16x
Matrix
Attention: This product should always be connected to a grounded
electrical socket.