Replacing the light bulbs – GE 20-27 User Manual
Page 13
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Instr
uctions
Installation Instr
uctions
Replacing the light bulbs.
Turning the control to the
(off) position does not remove power to the light circuit.
Fresh Food Compartment—Upper Light
Unplug the refrigerator.
Pull off the temperature control knobs.
Pull bottom of light shield down and
forward, then rotate the top up and off.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the light shield,
replace temperature control knobs and plug the
refrigerator back in.
3
2
1
1
3
5
7
9
Fresh Food Compartment—Lower Light
(on some models)
This light is located either behind the top drawer
or right above the top drawer (depending on your
model).
Unplug the refrigerator.
If the light is behind the top drawer
you
will need to remove the drawer and the
shelf above it. See the About storage
drawer removal
and About the refrigerator
shelves and bins
sections.
Grasp the bottom of the light shield and
pull it forward and up.
After replacing with an appliance bulb of the
same or lower wattage, replace the shield. If the
light was behind the top drawer, you will need to
replace the drawer and the shelf above it. Plug
the refrigerator back in.
3
2
1
Freezer Compartment
Unplug the refrigerator.
Remove the shelf just below light shield.
(The shelf will be easier to remove if it is
emptied first.)
Pull the light shield toward you to reach
the bulb.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the shield
and shelf and plug the refrigerator back in.
3
2
1
13