Grizzly G8145Z - Manual (Page 40)

-38-
g8144z/g8145z/g8146z
(Manufactured since 6/11)
Lubrication
the bearings on your bandsaw are factory lubri-
cated and sealed. Merely leave them alone unless
they need to be replaced.
When needed, brush a light coat of multi-purpose
grease on the tension leadscrew (all Models) and
guide post rack (Model g8146z only) to maintain
smooth operation (see
figures 44 & 45).
if the table becomes difficult to tilt, position it so
that you can brush a thin coat of multi-purpose
grease on the trunnion surface (see
figure 46).
figure 44. Model g8144z/g8145z tension
leadscrew.
figure 45. Model g8146z tension leadscrew
and guide post rack.
guide post rack
tension
leadscrew
figure 46. table tilted to expose trunnion
surface.
trunnion
surface