GE 29115 Series - Manual (Page 23)

Voice Time/Day Stamp and Real Time Clock
1. Make sure the answering system is ON.
. Press and hold the day/check button to set the day of the
week.
. Press and hold the hour button to set the hour (a.m. or
p.m.). Example: 12AM, 1AM, or 12PM, 1PM.
. Press and release the min button to advance the clock in
one minute intervals. Press and hold to increase by
5-minute increments.
5. After the time is set, the real time clock will be displayed
on the handset within 1 minute.
NOTE: You must set the day manually. You may
choose to set the time manually as well, although
the time is automatically transmitted by your
local phone company as part of Caller ID service.
If you subscribe to Caller ID service, the current
time is set automatically when you receive your
first CID record.
Speaker Volume
Use the volume (5 or 6) buttons to adjust speaker volume
on the base to a comfortable level. L1 is the minimum
speaker volume and L8 is the maximum.