Installing a flash dimm module, Installing a flash dimm module 8-5 – Genicom cL160 User Manual
Page 183
Apr 02
Genicom
Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide
8-5
Installing a FLASH DIMM Module
Installing a FLASH DIMM Module
1.
Ensure that the printer power switch is set to the OFF [ O ] position.
2.
Disconnect the power cord from the wall outlet.
3.
Turn thumbscrews on controller assembly counterclockwise until loose and gently pull con-
troller assembly towards you to remove from printer.