beautypg.com

Messages – Garmin VHF 725e User Manual

Page 39

background image

33

APPENDIX E

Messages

Messages

The VHF 725e responds to operating conditions in two ways,
LCD Display screen messages and audio tones. These messages
provide notification of errors in operation or the status of VHF 725e
features.

Audio Messages

Confirmation Tones - These tones, consisting of a single “Beep”,
are audible whenever you press a key on the unit and confirm
that unit is responding to your action.

Error Tones - These tones, consisting of two beeps and in some
instances a continuous string of beeps, and indicate that you
have pressed a key that cannot perform a function under the cur-
rent unit operating mode.

Screen Messages

“LOW BATT”

- This display appears when the battery capacity

has dropped to 10% of its capacity. The “LOW BATT” display
flashes and an initial three beep tone will be heard. The unit will
operate under normal use for approximately 30 more minutes.

“TX” and “RX” - If these two icons flash together or the “TX”
only flashes whenever the PTT key is pressed, the unit must be
serviced. Contact the GARMIN Product Support Department at
(1-800-800-1020) or (913-397-8200) for information.