Garmin VHF 725e User Manual
Page 28
22
GETTING
STARTED
6. Press the SCAN key to monitor the selected
channels. (Figure 10)
7. Press the 16 key once if you want to monitor
the emergency channel (16). (Figure 11)
8. Press the CALL key if you want to monitor
the programmed Call channel.
9. Press and hold the 16 key if you want to
activate the TRI-WATCH feature in order to
monitor the emergency channel, the Call channel
and one regular channel simultaneously.
To transmit on the VHF 725e:
1. Perform Steps 1 through 4 of the procedure for
receiving, above.
2. Choose a correct channel for communications.
Channels are restricted to use by various
government agencies, types of vessels and
maritime service operators. Review the list in
Appendix C to determine which channels are
available for your use.
3. Wait until the channel you have selected is free of
communications. THIS IS A REGULATORY
AGENCY REQUIREMENT!
NOTE: For communications over short distances,
press the H/L key until LOW is displayed on the
LCD. This reduces transmission power to one
watt, prolonging battery life.
Activate
Tri-Watch
Feature
Activate
SCAN
Feature
TRI
FIGURE 11
Receiving
and
Transmitting
Press to
Toggle
From
the Call
Channel To
Regular
Channels
C PGM