Garland SH/IN 5000 - Manual (Page 9)

Part # 4520898 (03/31/11) Page 9
INSTALLATION continued
Cut Out For Model BH/IN 2500
The size of the cut out in the built-in area must be,
11.41” x 11.41” (290 x 290mm), the depth 7.87” (200mm) and
the base at least 13.39” x 11.75” (340 x 273mm).
Side View of the right
0.06"
[1.5mm]
air exit air exit
4.06"
[103mm]
Ventilator
Mains
Cable
air supply
6.73"
[171mm]
11.02"
[280mm]
Ceran-surface
10.23"
[260mm]
10.23"
[260mm]
12.20"
[310mm]
12.20"
[310mm]
Front view
Connection
clutch for
operation device
Plug-in clutch for
operation device
3.07"
[84mm]
11.02"
[280mm]
5.04"
[128mm] 7.32"
[186mm]
Required cut-out of the work top
min. 11.42" x 11.42" [290mm x 290mm]
Mounting height
min. 7.87"
[200mm]
air supply