Installation instructions, Warning, Reconnecting gas – GE PTDS650GMWT User Manual

Page 3: Leak test

Installation Instructions

RECONNECTING GAS

Note:

The connector and fittings are designed for use

only on the original installation and are not to be reused

for another appliance or at another location. Keep flare

end of adaptor free of grease, oil and thread sealant.

Caution:

Use adapters as shown. Connector nuts must

not be connected directly to pipe threads.

WARNING:

NEVER USE AN OPEN

FLAME TO TEST FOR GAS LEAKS.

FLARE

NPT

PIPE SIZE

Listed connector ANSI Z21.24 / CSA 6.10

1/8" NPT PIPE

PLUG FOR

CHECKING GAS

INLET PRESSURE

AT LEAST 1/2"

3/8" NPT

TIGHTEN THE FLEXIBLE

GAS LINE USING TWO

ADJUSTABLE WRENCHES.

TIGHTEN ALL CONNECTIONS
USING TWO ADJUSTABLE WRENCHES.
DO NOT OVERTORQUE GAS CONNECTIONS!

LEAK TEST