GE 2-9315 - Manual (Page 14)

12
T
ROUBLESHOOTING
G
UIDE
Problem Solution
No dial tone. • Check hook switch to make
Won't dial out sure it pops up.
• Make sure speakerphone indicator comes
on (if using speakerphone.)
• Make sure TONE/PULSE is set to correct
position.
• Unplug the phone, wait 30 seconds, and
plug the phone back in.
Phone doesn’t ring • Check RINGER VOLUME.
• Could have too many phones on one
line. (See FCC registration information
regarding REN)
Low handset or • Check the volume settings (see p. 8).
speaker volume
Light and tone • This is normal as power is fluctuating
feedback flutter when with phone outpulsing.
dialing in PULSE mode.
Can’t be heard by • Make sure phone cord is securely
other party plugged in.
• Make sure MUTE indicator is off.
Memory dialing • Make sure you entered numbers
correctly. (See "Memory Dialing.")