GE ZKD910 - Manual (Page 11)

Care and Cleaning
Electric Warming Drawer
11
Be sure the controls are in the OFF position and all surfaces are cool before cleaning any part of the
warming drawer.
Warming
drawer
Use soap and warm water to thoroughly clean.
Stainless
steel
Do not use a steel wool pad; it will scratch the
surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the
grain. Follow cleaner instructions for cleaning
the stainless steel surface.
To inquire about purchasing stainless steel
appliances cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
National Parts Center 800.626.2002 (U.S.)
888.880.3030 (Canada)
ge.com (U.S.)
www.GEAppliances.ca (Canada)
Control
knob
The control knob may be removed for easier
cleaning.
Before removing the knob for cleaning, please
note that it is in the PROOF position.
Wash the knob in soap and water or a vinegar
and hot water solution but do not soak.
Dry and replace the knob.
Rack
Clean the rack with detergent and water. After
cleaning, rinse the rack with clean water and
dry with a clean cloth.