Gaggenau DF 241-760 - Manual (Page 10)

8
To remove the spray head and return the
dishwasher to its normal condition:
1. Turn the spray head counterclockwise and
remove it.
2. Retrieve the top basket.
3. Tilt the top basket upwards and position the
top basket rollers onto the roller guides.
4. Continue pushing the top basket until the
rollers are on the guide.
5. Push the top basket into the dishwasher.
Place your extra tall item(s) in the lower basket as
shown in Figure 13.
Figure 13
Do not block vent.
Preparing and Loading the Dishware
(continued)
To avoid dishwasher damage, do not
reinstall the top basket without removing
the baking tray spray head. Do not reinstall
the top basket with the sprinkler installed.
Loading Extra Tall Items
If an item is too tall to be placed into the lower
basket even with the top basket in the raised
position, remove the empty top basket by pulling it
out of the dishwasher until it stops rolling.
Pull the front of the basket upward and outward
until the rollers are completely free of the roller
guides. Set the top basket aside.
Push the
roller guides
back into the
dishwasher.
Insert the
Baking
Tray Spray
Head into
the top
basket
spray outlet
and turn the
spray head
clockwise
to lock it
into
position as
shown in
Figure 12.
NOTE: Keep the vent on the tub’s right side clear
by placing tall items such as plastic cutting
boards and tall baking sheets on the lower
basket's left side, center, or back.
Figure 12