GE G1 - Manual (Page 38)

Image Stabilization mode
Setting the Image Stabilization function
under ( ) mode.
1.Switch the mode dial to ( ) mode.
2.Press
Menu, and use Up/Down to select
the Image Stabilization settings.
3.Press to confirm the setting, and then
start shooting the movie.
"Stabilization during Movie mode is only
available when the Frame Rate is set to 15
fps"
The Image Stabilization mode combats the
effect of hand shake and allows you to take
pictures that would otherwise be blurred.
1.Switch the mode dial to ( ) mode.
2.Press
Shutter halfway to focus on the
subject.
3.Press Shutter fully to capture the image.