beautypg.com

Customcool, About customcool, On some models) – GE 23 User Manual

Page 7

background image

7

Empty the pan. Place the Chill/Thaw tray

in the pan. Place the items on the tray

and close the pan completely.

LCD Models:
Access by:
Home > Options >
Refrigerator Options > CustomCool Pan

Non-LCD Models:
Select the ExpressThaw

, ExpressChill

or SelectTemp

pad. The display and SET

light will come on. Tap the pad until the
light appears next to the desired setting.
Use the following chart to determine the
best setting to use.

ExpressChill can be set to 15, 30 or 45
minutes. The default is 15 minutes.

To stop a feature before it is finished:

For LCD Models:
Go into that feature’s menu and press
the OFF button.

For Non-LCD Models:

Tap that feature’s pad until no options
are selected and the display is off.

During ExpressThaw and
ExpressChill, the display on the
controls will count down the time
in the cycle (on some models).

After the ExpressThaw cycle is
complete, the pan will reset to the
MEAT setting (32°F [0°C]) to help
preserve thawed items until they
are used.

The displayed actual temperature of
the CustomCool pan may vary slightly
from the SET temperature based on
usage and operating environment.

NOTE: For food safety reasons, it is
recommended that foods be wrapped in
plastic wrap when using ExpressThaw.
This will help contain meat juices and improve
thawing performance.

About CustomCool

.

(on some models)

ge.com

The CustomCool

feature is used to quickly

chill items, thaw items or hold the pan at a
specific temperature. This feature is a system
of dampers, a fan, a temperature thermistor
and a heater.

The pan is tightly sealed to prevent
temperature fluctuations in the rest of
the refrigerator. The controls for this pan
are located on the dispenser with the
temperature controls.

How to Use

ExpressThaw

To remove:

Pull the drawer out to the stop position.

Rotate all four swing locks to the unlock

position.

Lift the front of the drawer up and out.

To replace:

Make sure all four swing locks are in

the unlock position.

Place the sides of the drawer into

the drawer supports, making sure

the swing locks fit on the drawer slots.

Lock all four swing locks by rotating them

to the lock position.

How to Remove and Replace the Drawer

ExpressChill

Consumer S

uppor

t

Tr

oubleshooting Tips

Operating Instructions

Safety Instructions

Installation

Instructions

Non-LCD Models Only

How it Works

R

EFRIGERATOR

O

PTIONS

B

ACK

B

EVERAGE

C

ENTER

C

USTOM

C

OOL

P

AN

T

URBO

C

OOL

LCD Models Only

OR