Global Machinery Company RL 500 - Manual (Page 6)

6
• Check the blade’s balance after sharpening.
• For reasons of safety, do not use the equipment with
worn or damaged parts. Parts are to be replaced and
not repaired. Parts that are not of the same quality
can damage the equipment and be dangerous for your
safety.
• Whenever the machine is to be handled, transported or
tilted you must:
– wear strong working gloves;
– grasp the machine at the points that offer a safe grip,
taking account of the weight and its distribution.
• Damaged blades and worn bolts are major hazards.
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
Contents of carton
• Handle bar locking knobs, with bolts and washers x2
• Catcher