Installing the sunshield – GE KTC-CBS24 User Manual
Page 10

Installing the Bracket and Camera
Bullet Camera User Manual
I
NSTALLING THE
S
UNSHIELD
Install the sunshield to protect the camera from rain and to minimize heat
build-up from sun exposure. To install the sunshield, see Figure 11 and
perform the following.
Note: For interior installations, the sunshield might not be necessary.
Figure 11. Installing the sunshield
1) Slide the sunshield into the desired position on the camera.
2) Tighten the sunshield screws (4) on both sides of the sunshield.
10
ptember 2003
1043349A
/ Se
This manual is related to the following products: