Summary screen, About the wash options, Adjusting the time settings – GE WPGT9350 User Manual

Page 10

Summary Screen

www.GEAppliances.com

OPTIONS

ADDITIVES

MIN

PRE
SOAK

DELAY
START

EXTENDED
SPIN

SIGNAL

EXTRA
RINSE

About the
Wash Options

The Wash Options allow you to set options for the
current wash cycle only. After you have made all
desired changes, press OK.

Delay Start –

Use to delay the start of your washer.

Press DELAY START to change the delay time.

Presoak –

Soaks the clothes before beginning the

wash cycle. Press PRESOAK to change the soaking
time.

Additives –

Appears ONLY AFTER a presoak has

been selected. Uses the contents of the Pretreat
dispenser tray for a presoak. When selected, the
washer will drain after the presoak and fill again for
the wash cycle. Press ADDITIVES to specify if you
will NOT be using a Pretreat additive or if you do
not want the washer to drain after presoak.

Extra Rinse –

Adds an additional cold rinse to the

end of the wash cycle.

Signal –

Alerts you that the cycle is complete. The

clothes should be removed when the beeper goes
off so wrinkles won’t set in. Touch SIGNAL to
select the volume or to turn the beeper off. The
new volume will be saved as the default setting.

Extended Spin –

Increases the length of the spin

time to extract more water from your clothes.

NOTE:

The water level will vary depending on the

load size and type. The washer uses adaptive filling
and load sensing to provide the appropriate water
level for effective and efficient wash performance
and energy usage.

NOTE:

Water may not cover the top level of the

clothes. This is normal for high efficiency washers.
The water fill is optimized by the system for better
wash performance.

ADJUST TIME SETTINGS

EXTENDED SPIN

CYCLE TIME

DELAY TIME

Adjusting the
Time Settings

You can adjust the length of the wash cycle by
changing the cycle time, adding a Delay Start
or adding an Extending Spin.

Cycle Time –

Press CYCLE TIME; then use

the arrows to select more or less time.

Delay Time –

Use to add a Delay Start to the

beginning of the wash cycle. Press DELAY
TIME

; then set the DELAY START time in the

OPTIONS menu.

Extended Spin –

Increases the length of the spin

time to extract more water from your clothes. Press
EXTENDED SPIN

; then select EXTENDED SPIN

from the OPTIONS menu.

NOTE:

After the wash cycle begins, you will not

be able to change the Cycle Time or Delay Time.
The washer will beep twice if you try to change
the times after the cycle begins.

YES

ARE YOU USING

PRESOAK ADDITIVES ?