GE 26976 User Manual
Page 39
39
S
ETTING
THE
T
IMER
At the handset
1. Make sure the handset is OFF (not in TALK mode).
2. Press the timer button.
3. The unit displays
SET TIMER 00 MIN 00 SEC
, and the first digit
(minutes) blinks in the display.
4. Press the desired number 0-9.
5. After the first digit is entered, the second digit blinks.
6. Continue entering digits for the number of seconds you want to set.
At the Spacemaker
®
unit
1. Make sure the speakerphone is OFF (not in TALK mode).
2. Press the timer button.
3. The unit displays
SET TIMER 00 MIN 00 SEC
, and the first digit
(minutes) blinks in the display.
4. Press CID VOL(-) arrow key to change the value of the blinking digit.
5. Press CID VOL(+) arrow key to blink the next digit.
6. Continue entering digits for the number of seconds you want to set.
NOTE:
Maximum timing period is 99 minutes 99 seconds, while one
minute equals 60 seconds.
S
TARTING
THE
T
IMER
When the countdown time is set,
1. Press the timer button to start counting down. You will hear a
confirmation tone.
2. When the countdown time expires,
TIMER ON 00 MIN 00 SEC
shows in
the display, and an alarm sounds for two minutes.
S
TOPPING
THE
T
IMER
When the phone is OFF (not in TALK mode), press the TONE*/exit or
timer button to stop the countdown and return to standby mode.
NOTE:
The timer stops automatically if the battery charge is low
or empty.