Grizzly G0513X2 - Manual (Page 44)

-42-
G0513 Series Bandsaws
Table Tilt
Model Tilt Specifications
g0513, g0513p, g0513aNV ..... 10° left, 45° right
g0513X2 ..................................... 5° left, 45° right
g0513X2B .................................. 5° left, 45° right
g0513X2BF ................................ 5° left, 45° right
g0513X2F ................................... 5° left, 45° right
Remove the positive stop bolt to tilt the table to the
left (as viewed from the front).
refer to Figures 59–60 to familiarize yourself with
the table tilt controls for your model bandsaw.
Models G0513, G0513P, &
G0513ANV
Figure 59. table tilt controls
(g0513, g0513p, and g0513aNV rear view).
table tilt Knob
angle indicator scale
located on opposite Face
lock
lever
Models G0513X2, G0513X2B,
G0513X2BF, & G0513X2F
Figure 60. table tilt controls
(g0513X2, g0513X2B, g0513X2BF, and
g0513X2F, rear view).
table tilt
lever
lock lever
angle indicator scale
To tilt the table:
1. disCoNNECt BaNdsaW FroM poWEr!
2. loosen the lock lever to enable table move-
ment.
3. use the table tilt knob/lever to adjust the
angle of the table as displayed on the angle
indicator scale.
4. secure the table with the lock lever before
continuing operation.