GE 234D1050P001 - Manual (Page 26)

26
Before you call for service…
PROBLEM Possible Causes What To Do
Small amount of water Inadequate load size for steam • If using the STEAM DEWRINKLE cycle, manually reduce cycle
on floor in front of dryer cycle selected, excess steam time . If using the STEAM REFRESH cycle, add more garments
condenses inside cabinet and to the load .
leaks out
Water on floor in back Loose water hose connection to • Tighten connection.
of dryer valve
Hose missing rubber washer at • Install rubber washer provided with hose.
connection with valve
Water drips from door Steam condenses on inner door • This is normal.
when opened after
a Steam Cycle
Cannot see steam at Steam released at different • This is normal.
beginning of cycle time in cycle
Cannot see steam at any The steam nozzle might be • Call 800.GE.CARES to order nozzle replacement kit WE25M71
time during the cycle clogged with debris from your or to request a service technician to replace this for you.
water supply
Garments still wrinkled Too many garments • Load fewer garments; manually increase time.
after steam cycle
Dryer continues to Extended Tumble was selected • Ensure EXTENDED TUMBLE option is not selected . For the STEAM
tumble after display REFRESH cycle, EXTENDED TUMBLE will automatically be turned
says Complete on and cannot be turned off .