GE E840S - Manual (Page 76)

File Numbering
After capturing photos or videos, the camera
will automatically save the file with a numeric
suffix. Language
See “
Setting the Language“ section on
page 26.
Video system
Use this setting to determine your video
system in the current area.
1. Select the
Video system setting from
the Setup menu as described previously.
2. Use the Up/Down navigation buttons to
select NTSC or PAL. Then press the
button to confirm.
The video output signal can be switched
to NTSC or PAL to accommodate different
regional standards. The appropriate setting
will vary between regions.
Select this
setting: Serial number is derived and
assigned to a new file as follows:
Continue
whether the number should
continue on from the last photo
you have taken
Reset reset the counter to 1 and
save files in a new folder in the
memory card.