Turning on and off – GE E840S User Manual
Page 25
0
0
To remove the SD/SDHC card, open the battery
compartment and gently push the card to
release it. Pull the card carefully.
Turning on and off
Press the
Power button to turn the camera
on. To turn off the camera, press the
Power
button again.
W
T
Power button
When turned on, the camera will enter the
mode according to the mode dial setting. You
can also turn the mode dial to change the
modes after the camera is turned on.
3. Close the battery compartment.
This manual is related to the following products: