GoVideo DVR1000 - Manual (Page 15)

15
PREP
ARA
TION
VCR Operation Setup (Continued)
VCR Setup Menu Options
11 Press MENU to display the MAIN menu.
2 2 Use v v/V V to select the SETUP menu, then press
ENTER.
The SETUP menu will appear.
3 3 Use v v/V V to choose the desired option on the
SETUP menu, then use b b/B B to choose the
desired setting.
FUNCTION OSD
The DVD+VCR on-screen displays can be turned on or off.
Press b/B to set FUNCTION OSD to ON or OFF.
LANGUAGE SELECT
The DVD+VCR on-screen menus can be displayed in English,
Spanish, or French.
Press b/B to set LANGUAGE SELECT to ENGLISH, SPAN-
ISH or FRENCH.
4 4 Press MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown in “Connecting Antenna/Cable
TV to DVD+VCR” on page 11.
AUTO CHANNEL PROGRAMMING
11 Press MENU to display the MAIN menu.
2 2 Use v v/V V to select the TUNING menu, then press
ENTER.
The TUNING menu will appear.
3 3 Press V V to choose the SOURCE SELECT option,
then use b b/B B to select TUNER.
Press b/B repeatedly to select TUNER or AV.
4 4 Use v v/V V to choose the AUTO CHANNEL SET option,
then use b b/B B to search for channels.
The tuner will automatically scan for all available
channels in your area and place them in the tuner’s
memory.
5 5 When AUTO CHANNEL SET is complete, make
sure TUNING BAND is set appropriately (TV or
CATV) in the TUNING menu.
Remember, TV is for over-the-air antenna recep-
tion, and CATV is for cable or wireless connection.
6 6 Press MENU to return to the TV screen.
77 Use CH (v v/V V) on the remote control or CH (v v/V V)
on the front panel to cycle the DVD+VCR
through the channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels in
memory manually.
1 Use V V to choose the CH. ADD/DEL option on the
TUNING menu. Use b/B to select a channel to add
or erase.
2 Use ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
3 Press MENU to return to the TV screen.