Wall mounting – Geemarc BDP400 User Manual
Page 16
15
Drill two holes vertically one above the other, 83mm apart,
and leave the screws protruding from the wall by 5mm.
Caution: Ensure there are no electrical lines, water pipes
etc. in the wall where the holes are drilled.
Turn the small hook in the receiver cradle 180-degrees so
that the receiver can be placed on-hook (the handset will
remain in place when mounted to a wall). Then hang the
telephone directly into the screws noting the wall mounting
holes on the back of the telephone.
WALL MOUNTING