7 receiver panel descriptions, Receiver panel descriptions – Gefen USB 2.0 LR Extender EXT-USB2.0-LR User Manual

Page 11

1 Power LED Indicator

This LED will become active once a valid connection is made between the

included 5V DC power supply and an open wall power socket.

2 Host Connection LED Indicator

This LED will become active once a valid connection is made by the host source

and the USB 2.0 LR Extender.

3 USB “A” Input Connector 1

Connect the USB device to this input.

4 USB “A” Input Connector 2

Connect the USB device to this input.

5 Link LED Indicator

This LED will become active once a valid connection is between the sender and

receiver units.

6 RJ-45 Connection Port

Connect a CAT-5, CAT-5e or CAT-6 cable between this port and the RJ45

connection port on the sending unit.

7 Activity LED Indicator

This LED will be active when traffic is passing between the sending and

receiving units.

8 5V DC Locking Power Receptacle

Connect the included locking 5V DC power supply between this port and an

open wall power socket.

RECEIVER PANEL DESCRIPTIONS