0 using infant restraint, 1 positioning harness straps – Graco ISPA162AB User Manual

Page 60

Text mode
Original mode

5.1 Positioning Harness Straps

1. Remove infant restraint from base and

rotate handle down to sitting position.
See

“4.1 Adjusting Handle” and “4.2

Removing and Attaching Seat”, page. 16.

2. Place child in infant restraint as shown .

3. Determine which pair of harness slots

are even with or just below your
child’s shoulders .

4. If the harness straps must be

adjusted: remove child from infant
restraint and move harness straps
to the proper harness slots by doing the
following:

Use harness slots

even with or just below

child’s shoulders

5.0 Using Infant Restraint

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS
FOR YOUR CHILD INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN THE EVENT OF A SHARP TURN,
SUDDEN STOP OR CRASH. The harness straps must be
properly adjusted to fit your child according to the following
instructions.