Gefen GTV-WHD-1080P-LR-BLK - Manual (Page 16)

Using Multiple Sender Units
The Wireless for HDMI can be used with up to eight Sender units to provide
switching capability between Sender units.
Adding a new Video Source
Before adding an additional Sender unit to the Wireless for HDMI network, make
sure that a single Sender / Receiver pair function correctly.
1. Connect the Sender unit to a Hi-Def source using an HDMI cable.
2. Connect the power supply to the Sender unit.
3. Point the IR Remote Control at the Receiver unit and press the MENU
button. The Setup menu will be displayed.
12
Link Video
Wireless for HDMI R
Link Video
Wireless for HDMI S
Link Video
Wireless for HDMI S
Link Video
Wireless for HDMI S
Figure 1:
Receiver unit with
multiple Sender units
Setup
Add new Video Source
Remove Video Source
Modify Video Source Name
Disconnect Wireless Link
OPERATING THE WIRELESS FOR HDMI