Verify textual metar, Verify wind – Garmin XM GDL 69 User Manual
Page 22
4.3.3
36B
Verify Textual METAR
To select the METARs Text Page:
1.
Turn the larger outer knob on the right and move through the Page Groups until the AUX Page
Group is selected.
2.
Turn the small inner knob on the right to the Data Link Page.
3.
Press PUSH CRSR and turn small inner knob to highlight Request METAR, put in airport ID, then
go back and select Textural METAR. Turn small knob and select airport from list. Press ENT. The
airports are added to the list through the Request METAR page.
4.
Press ENT. The Textual METAR Page is displayed for the airport you selected similar to
X
Figure 4-5
X
,
if
available
. You can enter a different identifier by highlighting ‘TEXTUAL METAR’ and press
ENT. Turn the small right knob and scroll through the list of four letter identifiers.
Figure 4-5. Textual METAR Page
4.3.4
37B
Verify Wind
To display wind data on the NAV Weather Page:
1.
Select the NAV Weather Page.
2.
Press CRSR. The upper left hand corner data field flashes.
3.
Turn the small right knob and select ‘WINDS’.
4.
Press CRSR. The wind icons are displayed on the NAV Weather Page similar to
X
Figure 4-6
X
, if
available
.
Figure 4-6. Wind Data Page
Page 16
XM Activation Procedures
190-00355-04
Rev. H