Garmin XM GDL 69 - Manual (Page 14)

5.
Rotate the inner FMS knob clockwise until the AUX-XM INFORMATION page is displayed.
Press the INFO smart key to view your Audio Radio ID and Data Radio ID. See
X
Figure 3-2
X
for
these locations.
6.
A list of Weather Products will also be shown on the bottom half of the screen. Boxes filled in
green will correspond with the type of subscription you have access. For example, if the weather
subscription you have purchased allows NEXRAD, the box next to NEXRAD will be green.
Page Mode - Default mode INFO
Figure 3-2. AUX-XM Information Page
3.1
12B
Verify the Radios are Ready to be Activated
The AUX - XM INFORMATION page has two modes, Radio Information and Radio Operation. The
page should default to INFO mode (if the radio is not activated). You will need to be on this page when
you call for activation. You can change modes with the RADIO/INFO soft keys. The INFO page should
look like
X
Figure 3-2
X
.
Pressing the RADIO smart key will display the AUX – XM RADIO page and will look similar to
X
Figure
3-3
X
If the radio is inactivated and working properly the G1000 will display the free-to-air channels,
which are channel 0 (Radio ID), channel 1 (XM Preview) and channel 247 (Emergency Alert). If you can
see the free-to-air channels and can hear channel 1, you are ready to activate your radios. Press the soft
key under INFO and the page will return to the INFO page.
Figure 3-3. AUX – XM Radio Page
Page 8 XM Activation Procedures
190-00355-04 Rev. H