Stovax PM219 - Manual (Page 21)

21
INSTALLATION INSTRUCTIONS
2.6 Or
• Fit a Multi-fuel box, Diagram 9
This must be done with the frame removed, see Section 3
9
PR8084
2.7 Fit a Contemporary Multi-fuel Log bar, Diagram 10
Slide into channels in the front of the Multi-fuel Box and
cutout in grates.
The removable frame base is not shown for clarity but must
be in place before the Log Bar is fitted, See Section 3A.
10
PR8082
3. FITTING OF FRAMES
3.1 Brass or Brushed Steel Profil Frames
• Fit the brass or brushed steel Profil Frame, Diagram 11
11
Tab
• Locate the frame around the flange
• Fold the tabs around the back edge of the flange - shown
in detail (2 on sides and 2 on top)
3.2 Arts Frames
• Drill 4 Ø7.5 holes in the positions shown, Diagram 12
A 1:1 scale drilling template is provided with the frame to
assist in correctly locating the holes.
16" Frame Drilling Template 12
338
434
18
30
Ø7,5THRO - 4 POS
20
547
All dims to be 0.5mm +-
• Attach Upper ('U' shaped) and Lower (L shaped) brackets
on the front of the firebox flange using M6 Countersunk
Screws and Nuts, Diagram 13
13
PR8086
M6 Nut
M6
Countersunk
Screw
• Line the frame up with the flange
• Lower the frame over the brackets and slide into bracket
slots
• Check it is located securely, Diagram 14