beautypg.com

2 configuration file download, 4 customization own screensaver images – Grandstream Networks GXV-3000 User Manual

Page 46

background image

GXV-3000 User Manual

Wind Currents Communications, Inc.


- 46 -

6.2 Configuration File Download

Grandstream SIP Device can be configured via Web Interface as well as via Configuration File
through TFTP or HTTP. “Upgrade Server” is the TFTP or HTTP server path for configuration file. It
needs to be set to a valid URL, either in FQDN or IP address format.

A configuration parameter is associated with each particular field in the web configuration page. A
parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric
numbers. i.e., P2 is associated with “Admin Password” in the ADVANCED SETTINGS page. For a
detailed parameter list, please refer to the corresponding configuration template of the firmware.

When Grandstream Device boots up or reboots, it will issue request for configuration file named
“cfgxxxxxxxxxxxx”, where “xxxxxxxxxxxx” is the MAC address of the device, i.e.,
“cfg000b820102ab”. The configuration file name should be in lower cases.

6.3 Managing Firmware and Configuration File Download

When “Automatic Upgrade” is set to “Yes”, Service Provider can use P193 (Auto Check Interval, in
minutes, default and minimum is 60 minutes) to have the devices periodically check with either Up-
grade Server. This allows the device periodically check if there are any new changes need to be taken
on a scheduled time. By defining different intervals in P193 for different devices, Server Provider can
spread the Firmware or Configuration File download in minutes to reduce the Firmware or Provision-
ing Server load at any given time.

6.4 Customization own Screensaver Images

User can customize the screensaver images by using the free “screensaver picture generator tool”
downloadable from our website:

http://www.grandstream.com/y-downloads.htm


User can put own preferred JPEG images into the phone as screensaver. Here are the requirements of
the pictures which can be converted as screensaver:

• Baseline JPEG

• 320x240 in dimension
• RGB color space

• 8-bit data